|  Share | Cite


Tools for Measuring Pressure

The instrument for measuring atmospheric pressure, the barometer, is calibrated to read zero when there is a complete vacuum; the pressure indicated by the instrument is therefore called absolute pressure. The term "pressure gauge" is commonly applied to the other instruments used for measuring pressure. They are manufactured in a great variety of sizes and types and are employed for recording pressures exerted by substances other than air—water, oil, various gases—registering pressures as low as 13.8×103 N per sq m (2 lb per sq in.) or as high as 13.8×107 N per sq m (10 tons per sq in.) and over (as in hydraulic presses). Some pressure gauges are made to carry out special operations, such as the one used on a portable air compressor. In this case, the gauge acts automatically to stop further operation when the pressure has reached a certain point and to start it up again when compression has fallen off to a certain limit.

In general, a gauge consists of a metal tube or diaphragm that becomes distorted when pressure is applied and, by an arrangement of multiplying levers and gears, causes an indicator to register the pressure upon a graduated dial. The Bourdon gauge used to measure steam pressure and vacuum consists essentially of a hollow metal tube closed at one end and bent into a curve, generally elliptic in section. The open end is connected to the boiler. As the pressure inside the tube (from the boiler) increases, the tube tends to straighten out. The closed end is attached to an indicating needle, which registers the extent to which the tube straightens out. For pressure too small to be accurately measured by the Bourdon gauge, the manometer is used. The simplest type of manometer consists of a U tube partially filled with a liquid (i.e., mercury), leaving one end open to the atmosphere and the other end to the source of pressure. If the pressure being measured is greater or less than atmospheric pressure, the liquid in the tube moves accordingly. Pressures up to several million lb per sq in. have been produced in experiments to determine the effect of high pressure on various substances.

Sections in this article:

The Columbia Electronic Encyclopedia, 6th ed. Copyright © 2012, Columbia University Press. All rights reserved.

See more Encyclopedia articles on: Physics