The Process of Glassmaking
The processes of glassmaking have remained essentially the same since ancient times. The materials are fused at high temperatures in seasoned fireclay containers, boiled down, skimmed, and cooled several hundred degrees; then the molten glass (called metal) is ladled or poured into molds and pressed, or is blown (sometimes into molds), or is drawn. The shaped glass is annealed to relieve stresses caused by manipulation, then is slowly cooled. The glass, formerly annealed on shelves in a melting furnace, is now usually carried on rollers through annealing ovens (lehrs).
Although today most hollow vessels such as light bulbs or containers are machine blown, fine ornamental hollow ware is still made by gathering a mass of glass at the end of a long, iron blowpipe, blowing it into a pear-shaped bulb, which is rolled on an oiled slab (marver), shaped with tools, and then reblown, often into a mold; the glass is reheated periodically in a small furnace (glory hole). It is finally transferred to an iron rod (punty) attached to the base of the vessel, and the lip is shaped and smoothed. Methods of decoration include cutting, copper-wheel engraving, etching with hydrofluoric acid, enameling, gilding, and painting.
Sections in this article:
The Columbia Electronic Encyclopedia, 6th ed. Copyright © 2012, Columbia University Press. All rights reserved.
More on glass The Process of Glassmaking from Infoplease:
See more Encyclopedia articles on: Arts and Crafts