screw, simple machine consisting essentially of a solid cylinder, usually of metal, around which an inclined plane winds spirally, either clockwise or counterclockwise. It is used to fasten one object to another, to lift a heavy object, or to move an object by a precise amount. The ridge forming the inclined plane is called the thread; in cross section the ridge may be approximately triangular, square, or rounded. The vertical distance from any point on one thread to a corresponding point on the next successive thread is called the pitch. A thread can also be placed on the inner surface of a hollow cylinder. Two screws of the same pitch and diameter, one on the outer surface of a solid cylinder and the other on the inner surface of a hollow cylinder, can be arranged so that one may be driven spirally into the other, as in the common nut and bolt. The thread on the surface of the bolt is called the external, or male, screw; that on the inner surface of the nut, the internal, or female, screw. The common jackscrew used to lift automobiles, houses, and other heavy objects is an application of this principle. The internal screw is situated in the base, the external screw on a metal cylinder; at the top of the cylinder a lever or handle is fastened. As the handle is rotated, the external screw moves up the internal screw and the object placed on top of the jack is lifted. The mechanical advantage of the jackscrew, as of any other screw, is theoretically the ratio between the circumference through which the end of the handle moves and the pitch of the screw. Since, however, there is much friction in the operation of a screw, the amount of work put into this machine is much greater than the amount done and the efficiency is small. On the other hand, the small effort necessary to turn the handle, when compared to the enormous load raised, makes such a device of great value. The screw is often used for making delicate adjustments of tools and machines, e.g., in the micrometer screw and in the carburetor of the gasoline engine (for regulating the flow of gasoline). The self-tapping screw has notches in the first few threads that can cut female threads in a hollow cylinder. Wood and metal screws, the carpenter's and machinist's vise, the propeller of a boat or airplane, Archimedes' screw, and many other devices are applications of the screw.
The Columbia Electronic Encyclopedia, 6th ed. Copyright © 2012, Columbia University Press. All rights reserved.
More on screw from Infoplease:
See more Encyclopedia articles on: Technology: Terms and Concepts